Research & Theses
Research Overview
Materials used in mechanical structures around the world such as vehicles, aircrafts, power plants and the like are under forces that correspond to the role and environment they are being used in respectively. In our laboratory, we focus on actual phenomena associated with the destruction or deformation of the material subjected to these forces, working on diverse problems related to material strength studies such as fracture mechanics and elastic-plastic mechanics. Based on the information obtained from various measuring techniques such as defect detection using ultrasonic waves and stress measurement using infrared, we step into underlying theories of deformation and fracture processes of material to spread design guidelines for reliable materials and structures and the design of materials and structures to worldwide.
Please see the following page for the list of laboratory achievements.
Professor Hirotsugu Inoue
Associate Proffesor Motoki Sakaguchi
Assistant Professor Yu Kurokawa
Graduate Theses in the Past
Doctoral dissertations
| Year | Name | Title |
|---|---|---|
| 2021 | KANG Chao | Mechanics of paraffin droplet impacted and solidified on metal substrate |
| Shiyu Suzuki | Temperature and Time Dependent Fatigue Crack Propagation in Ni-base Superalloys | |
| 2020 | CHEN Xiaosheng | Crystal plasticity assessment of low temperature fatigue crack propagation in Ni-base single crystal superalloy |
| 2018 | Tran Hai | Impact Force Reconstruction with Wavelet Deconvolution Technique |
| 2017 | Ryogo KAWAI | Reliability Improvement of rapid evaluation of fatigue limit based on temperature variation |
| Yoshifumi OKAJIMA | Study on influence of residual stress on peeling durability of thermal barrier coating | |
| NGUYEN, Chanh Nghia | Evaluation of Periodic Triangular Profile of Internal Surfaces by Ultrasonic Backscatter | |
| 2011 | Hung Anh LY | Numerical Study for Validation of Rapid Evaluation Technique of Fatigue Limit using Infrared Thermography |
| 2008 | Hiroyuki MAE | Material Characterization and Modeling for Mechanical Design of Automobile Components |
| Ryota MASUDA | A Study on Peel Propagation Behavior and Peel Strength Evaluation of Adhesive Tapes | |
| 2006 | Akira SHINOZAKI | Mechanical Analysis of Polymeric Materials by Molecular Chain Network Model |
| M. Nizar Machmud | Study on Impact Resistance Characteristics oｆ PC/ABS Blends | |
| 2003 | Yoshihiro HIROKAWA | A Study on Stress Measurement using a Non-Linear Thermoelastic Effect |
| 1999 | Keisuke HAYABUSA | A Study on Stress Distribution Visualization by Inverse Problem Analysis |
| 1998 | Husaini | Study on Fracture Behavior of ABS Resin and PC/ABS Blends under Mode I and Mixed Mode Loading |
| 1985 | Tomoaki TSUJI | A Study on Torsional Stress Analysis of the Stepped Bar |
| 1978 | Toshiaki HARA | A Study on Non-Axisymmetric Elastic Contact Problem by Annular Stamp |
| 1974 | Takahito GOSHIMA | A Study on Unsteady Thermal Stress of Uneven-Heated Plank Structure Parts |
Master's theses
| Year | Name | Title |
|---|---|---|
| 2023 | Akira Koshio | Temperature variation due to fatigue crack initiation and propagation of single crystal metallic material under cyclic loading |
| Hikaru Takahashi | Detection of Defects for Laser Welded Plastic by Infrared Thermography | |
| Kotaro Noguchi | Generation mechanism of higher harmonic component in temperature fluctuation of metallic materials under cyclic loading | |
| Ikki Ikeda | In-situ observation and thermo-fluid simulation for impact, flow and solidification of a paraffin droplet | |
| 2022 | Yuto INO | Evaluation of Water Absorption of Adhesive Layer in CFRP Adhesive Joints by Ultrasonic Method |
| Kento KOZAKI | Evaluation of Thermal Oxidative Degradation of Rubber by Measuring Thermal Diffusivity Using Laser Heating and Infrared Measurement | |
| Shinichi TAKAGI | Low dissipative capture method for discontinuous solutions based on the TENO method | |
| Kota CHIYA | In situ observation and numerical analysis of flow and solidification behavior of paraffin droplets impacted on solid surfaces | |
| Hayato MATSUOKA | Effect of Tensile Holding on Acceleration/Deceleration of Fatigue Crack Growth of Alloy718 at Elevated Temperatures | |
| Koki YAMANAKA | Parameter estimation of creep constitutive equation by inverse analysis using digital image correlation method and FEM | |
| Kazushi YAYOI | Machine Learning Prediction of Impact Damage to Flexible Display Films | |
| 2021 | Putt THANAKUN | Crystal plasticity analysis for temperature dependent fatigue crack growth in a single crystal Ni-base superalloy |
| Ryota OKAMOTO | Effect of γ/γ’ microstructure and its temperature dependency on fatigue crack propagation in a single crystal Ni-base superalloy | |
| Satoshi SHIMANUKI | Generation mechanism of higher harmonic component in temperature fluctuation of metallic materials under cyclic loading | |
| Keisuke SUZUKI | Temperature dependent crack opening and closure behavior in forged TiAl-based alloys | |
| Kosuke TOKIHIRO | Temperature variation accompanied with fatigue damage of single crystal metal associated with cyclic loading | |
| Fuminori NAKAMURA | Fatigue fracture of steel-aluminum alloy joint fabricated by dissimilar joining method DSW | |
| HE Jiaqi | Fatigue Life Extension of Spinal Rod by Twice Bending Method | |
| YANG Weiyao | Temperature variation of the rubber dumbell during cyclic tensile loading | |
| ZHANG Qihe | Effect of high temperature tension hold on fatigue crack propagation in Alloy 718 | |
| 2020 | GONG Wenxiang | Investigation on temperature dependent fatigue crack propagation in forged Titanium Aluminum alloys |
| Takahiro KAWAGUCHI | Detection of water absorption of CFRP adhesive joint by ultrasonic testing | |
| Fubuki TANAKA | Measurement of impact force and prediction of damage acting on film for flexible display | |
| Masaya DOMEN | Effects of temperature and grain boundary on fatigue crack propagation in polycrystalline Ni-based superalloy | |
| Shun TOMIZAWA | Simultaneous evaluation of thermal diffusivity and internal defect depth of wall based on time variation of surface temperature distribution | |
| Koichiro MOGI | SPH simulation for impact, spreading and solidification of droplets | |
| ZHOU Junyao | Effects of creep and interfacial adhesion on residual stress development during rapid solidification of paraffin droplet | |
| 2019 | Takumi KATAKAI | Fatigue limit rapid estimation based on phase and amplitude of temperature variation due to cyclic loading |
| Yu KITAHARA | Crystal plasticity analysis for fatigue crack propagation in Ni-base superalloys at low and intermediate temperatures | |
| Akito SAITO | On the residual stress developed during solidification and adhesion process of paraffin droplet | |
| Teho CHAN | Temperature variation of rubber sphere subjected to cyclic compressive loading | |
| Michiyasu HIROTA | Stress measurement of structure under service load by thermoelastic stress analysis | |
| 2018 | Yuki OTSUKA | Strain field measurement around the crack tip in Ni-base superalloy using Digital Image Correlation |
| Kotato SAKAMOTO | Detection of internal defects in concrete using infrared thermography | |
| Shiyu SUZUKI | Study on temperature dependent fatigue crack propagation in single crystal Ni-base superalloy | |
| Yoshinori NIWA | Effect of microstructure and temperature on fatigue crack propagation in forged TiAl based alloy | |
| Masafumi MATSUNAMI | Crack propagation test at room temperature with Ni-base superalloy 2D polycrystalline specimen | |
| KANG Chao | Quenching stress and fracture during solidification and adhesion process of paraffin droplet impacted onto substrate | |
| 2017 | Ayumi AMANO | Residual stress developed in solidification and adhesion process in paraffin coating with cracking and debonding behavior |
| Naoki KUWAMURA | Ultrasonic Pulse Evaluation of Solid Back-Surface Roughness | |
| Mana HIGAKI | Fatigue crack propagation in polycrystalline Ni-based superalloy at room temperature | |
| Takumi YOSHIKAWA | Study on Temperature Fluctuation of Rubber Subjected to Cyclic Deformation | |
| 2016 | Yu AOKI | High Temperature Fatigue Strength of Friction Welded Dissimilar Joints between Martensitic Stainless Steel and Ni-base Superalloy |
| Masakazu ISHITOBI | Study on Temperature Fluctuation of Rubber under cyclic deformation | |
| Ryota KOMAMURA | Effects of Crystallographic Factors on Stage I Fatigue CrackPropagation in Ni-base Superalloys | |
| Takahiro TABATA | Discrimination of flaw echo at weld zone by frequency band division of ultrasonic flaw detection image | |
| Takuya NIIOKA | Inverse Analysis for Thermal Influence of Coating on Thermoelastic Stress Analysis | |
| Sho HARADA | Flaw Identification of Plate-Like Structures using Ultrasonic Dispersion Compensation | |
| 2015 | Gota AOKI | Fundamental study on thermoelastic stress analysis of the rubber material |
| Kyohei KONO | Effects of test temperature and crystal orientations on fatigue crack growth in a Ni-based single crystal superalloy | |
| Shogo TOKUNAGA | Evaluation of Internal Delamination Depth of Concrete Material using an Infrared Thermography | |
| Taro YOKOGUCHI | 単結晶Ni基超合金の第I段階疲労き裂進展に関する有限要素解析 | |
| 2014 | Naoki OSADA | Elastic Modulus Evaluation of Brake Friction Material by Ultrasonic Method |
| Ryota KATO | Flaw Imaging of Plate-like Structures using Ultrasonic Dispersion Compensation | |
| Daichi KOUYAMA | Experimental Investigation on Stage I Fatigue Crack Propagation in CT specimens of Single Ni-base Superalloy | |
| Masaki SUGINO | Ultrasonic Evaluation of Material Back-Surface Roughness | |
| 2013 | Ryogo KAWAI | Reliability Improvement of Fatigue Limit Rapid Evaluation Based on Temperature Variation Measurement |
| Shin YANAGISAWA | Quantitative Evaluation of the Thermal Effect of Coating on Thermoelastic Stress Analysis | |
| 2012 | Yoshihide NAKATANI | Influence of Internal Friction on Rapid Evaluation of Fatigue Limit Based on Measurement of Temperature Evolution |
| 2011 | Kazumasa KATO | Study on Ultrasonic Testing Image by Lamb Wave |
| 2010 | Masafumi ITO | A Study on Condition Assessment of Piping Flange Joint by Impact Wave method |
| Masayuki IMAIZUMI | Study on Time-of-Flight Diffraction Method using Phased Array Probe | |
| Jun NAKAMURA | A Study on Rapid Evaluation of Fatigue Limit Based on Measurement of Temperature Distribution | |
| 2009 | Tetsuji SUENAGA | A Study on the Experimental Vibration Analysis by Thermoelasticity Method |
| Yosuke TORII | Influence of Thermal Conduction in Bend Stress Measurement by Thrmoelasticity Method | |
| Shinichi MATSUI | A Study on Scattering of Ultrasonic Waves at Rough Surfaces | |
| 2008 | Daisuke KANEKO | Effect of Intermetallic Compound Layer on the Fatigue Strength of the Solder Joint |
| Kiyoshi NAKAYAMA | A Study on the Inverse Problem Analysis of Automobile Skeleton Passing Force | |
| Yuki MATSUOKA | A Study on Thermoelastic Stress Measurement under Service Load | |
| Taiki MORI | The Study on the Fatigue Limit Evaluation by Dissipation Energy Measurement | |
| Yuta MORIYA | Study on Ultrasonic Flaw Detection with Contact-Type Line-Focus Probe | |
| 2007 | Sadaharu OKAMURA | A Basic Study on the Mechanical Behavior of Fit Joint Part of Portable Electric Devices |
| Masaki OGAWA | A Study on Impact Damage Simulation of Alminum Alloy Parts | |
| 2006 | Eiji KIBA | Deformation and Fracture Analysis of Polymer by Molecular Chain Model |
| Shigeru MORINAGA/td> | The Study on the Fatigue behavior of UV Irradiated E-glass Fiber Reinforced CompositeMaterial | |
| Eiji WADA | Study on Residual Stress Evaluation Based on Thermal Spray Process for Ceramic Thermal Barrier Coating | |
| Mohamad Fauzan Adziman | Mechanical Behavior of Aluminum Foam under Compressive Loading | |
| 2005 | Daisuke ITO | A Study on Improvement of the Accuracy of the Thermoelastic Stress Measurement by Heat Conduction Inverse Analysis/td> |
| Makoto HAYASAKI | A Study on Ultrasonic TOFD Method using a Contact-Type Line-Focus Probe | |
| Takeshi MIYAZAKI | A Study on Fatigue Damage of Lead-Free Solder Joints | |
| Taishi MOCHIDUKI | A Study on the Impact Crushing of Aluminum Alloy Parts | |
| 2004 | Kotaro KUREBAYASHI | A Study on the Identification of the Residual Stress by Thermoelastic Method |
| Satoshi TSUCHIYA | A Study on Reliability Evaluation of Lead-free Solder Joints | |
| Yuki NAKAMURA | A Study on Drop Impact of Portable Electronics | |
| Takashi NAKANO | A Study on Multi-Delamination in the Multi-Layer Laminated Film | |
| 2003 | Yohei OKUBO | Material Mechanical Study on the Transmission Efficiency of the Optical Fiber Cable |
| Yoshifumi OKAJIMA | A Study on Interfacial Fracture Toughness Evaluation of Ceramic Thermal Barrier Coating | |
| Akira SHINOZAKI | A Study on Mesomechanics of the polymer | |
| Takashi TATENO | A Study on Ultrasonic Propagation Characteristics of the Laminated Piezoelectric Material | |
| M. Nizar Machmud | A Study on Impact Resistance Characteristics of PC/ABS Blends | |
| 2002 | Takuro ASAOKA | A Study on Ultrasonic Excitation Characteristics of the Contact-Type Line-Focus Probe |
| Yuki KATO | The Inverse Heat Conduction Analysis of Thermoelastic Stress Measurement Method | |
| Hiroshi KASHIMA | A Study on the Impact Strength of the Solder Joints | |
| Eiji KUSABIRAKI | Analytical Study on Fracture and strength of the polymer alloy | |
| Yoshikazu SHINOHARA | Strength Evaluation of Thin Film Interface by Micro-Indentation | |
| Goki HAN | A Study on the Adhesion Strength Evaluation of Thin Film on the Polymer Substrate | |
| 2001 | Jin SATO | A Study on Debonding Damage of Ceramic Thermal Barrier Coating |
| Miwa SHIBATA | Influence of Morphology on the Fracture Properties of the Polymer Alloy | |
| Shunsuke HAYASHI | A Study on Interface Debonding Behavior | |
| Takuya MATSUNAGA | A Study on Ultrasonic Non-Destructive Evaluation of Particle Dispersed Composite Material | |
| Yuki YASHIRO | A Study on the Fracture Properties of Semiconductor Sealing Resin | |
| Yu YOKOYAMA | A Study on the Inverse Problem Analysis of the Impact Force by the Wavelet Transform | |
| Shin RYO | A Study on the Impact Fracture Properties of PC / ABS Resin |
Bachelor's theses
| Year | Name | Title |
|---|---|---|
| 2023 | Yuto Sato | Prediction of Impact Damage on Laminated Films for Displays Using Machine Learning |
| Yuta Someya | Temperature variation associated with slip deformation and crack initiation in a single crystal material under cyclic loading | |
| Futa Takebe | Flow and solidification of water droplets impinging on solid surfaces and developmental behavior of residual stress | |
| Keita Mase | Effect of crystallographic anisotropy on fatigue crack propagation and arrest in a single crystal metal | |
| Takato Morikawa | Fatigue crack propagation property of additively manufactured Heat-Resistant Material Waspaloy | |
| 2022 | Teruaki Kato | Relationship between Poisson's ratio and temperature variation in uniaxial tensile of rubber |
| Yuta Kaneko | Prediction of Impact Damage on Polymer Films for Displays Using Neural Networks | |
| Itsuki Sasakura | Effects of Oxidation and Stress Relaxation on Fatigue Crack Growth in Heat-Resistant Superalloys | |
| Koichiro Tanaka | Deformation and cracking of paraffin film impacted and solidified on solid surface | |
| 2021 | Ikki Ikeda | Effect of heat transfer on impact and flow of paraffin droplets |
| Akira Koshio | Fatigue damage and temperature variation of a single crystal metallic material associated with cyclic loading | |
| Yusuke Sakurai | Effect of microstructure on fatigue crack propagation in a single crystal Ni-base superalloy | |
| Hikaru Takahashi | Detection of Weld Defects in Plastic Products by Infrared Measuremen | |
| 2020 | Yuto INO | Ultrasonic Pulse Evaluation of Solid Back-Surface Roughness |
| Kento KOZAKI | Detection of rubber degradation by laser heating and infrared measurement | |
| Kota CHIYA | SPH simulation for solidification and shrinkage of paraffin | |
| Hayato MATSUOKA | Creep induced retardation of fatigue crack propagation in a single crystal Ni-base superalloy | |
| Koki YAMANAKA | Optimal estimation of creep constitutive equation based on strain measurement by digital image correlation | |
| 2019 | Ryota OKAMOTO | Creep-fatigue crack propagation in a polycrystalline Ni-base superalloy |
| Keisuke SUZUKI | Fatigue crack growth behavior on forged TiAl alloy | |
| Kosuke TOKIHIRO | Temperature Variation and Fatigue Failure of Metallic Material Subjected to Cyclic Loading | |
| Fuminori NAKAMURA | Fatigue properties of a dissimilar joint for automotive body | |
| 2018 | Takahiro KAWAGUCHI | Application of Ultrasonic TOFD Method to Weld with Linear Misalignment |
| Takenori TAGUCHI | High temperature fatigue crack propagation in a Polycrystalline Ni-based Superalloy | |
| Fubuki TANAKA | Study on Impact Resistance of Film for Flexible Display | |
| Masaya DOMEN | Experimental investigation of fatigue crack retardation near the grain boundary | |
| Kyoichiro NUMATA | The measurement of In-Service Stress by the Thermoelastic method | |
| Koichiro MOGI | SPH simulation for impact and spreading of droplets | |
| 2017 | Shunsuke ONO | Effects of Temperature and Crystallographic in orientation on High-temperature Fatigue Crack Propagation in Ni-based superalloys |
| Akito SAITO | Solidification and adhesion behavior of paraffin droplet impact on metal substrate | |
| Teho CHAN | Measurement of Temperature Fluctuation of Rubber Sphere under Cyclic Compressive Loading | |
| Atsuya HASHIMOTO | Impact Force and Damage in Collision between Touch Panel and Pen | |
| Michiyasu HIROTA | The measurement of In-Service Stress by the Thermoelastic method | |
| 2016 | Yuki OTSUKA | Strain Field Measurement at Stress Concentration using Digital Image Correlation and Application to High Temperature Environment |
| Shiyu SUZUKI | Temperature Effect on the Fatigue Crack Propagation Property of Syngle Crystal Ni-based Superalloy | |
| Hirofumi NISHIE | Thermal Diffusivity Evaluation of Concrete Material using an Infrared Thermography | |
| Masafumi MATSUNAMI | Effects of Crystal Orientation and Grain Boundary on Fatigue Crack Propagation Behavior in Polycrystalline Ni-based Superalloy | |
| 2015 | Shuo ZHANG | Strength Evaluation of Friction Welded Dissimilar Joint for Micro Gas Turbine |
| Ayumi AMANO | Fundamental Study on Residual Stress Development Process for Thermal Barrier Coating | |
| Naoki KUWAMURA | Roughness Evaluation of Non-Periodic Back-Surface using Ultra-sonic | |
| Mana HIGAKI | Fatigue Crack Initiation and Initial Propagation in Polycrystalline Ni-based Superalloy | |
| Takumi YOSHIKAWA | Study on Rapid Evaluation of Fatigue Limit using Thermal Infrared Camera | |
| 2014 | Masakazu ISHITOBI | Observations of Deformation Behavior and Temperature Fluctuation of Rubber under Cyclic Loading |
| Ryota KOMAMURA | Experimental Investigation on Fatigue Crack Propagation in a Polycrystalline Ni-based Superalloy | |
| Takuya NIIOKA | Inverse Analysis Method for Measuring Coating Properties Using Thermoelastic Effect | |
| Yuta HOSAKA | Finite Element Analysis for Stage I Fatigue Crack Growth in Polycrystal Model | |
| 2013 | Gota AOKI | Temperature Variation Measurement of Rubber with Cyclic Loading |
| Toshiya KIMURA | Experimental Investigation on Fatigue Crack Propagation in Thin-walled CT Specimens of Single Crystal Ni-based Superalloys | |
| Takahiro TABATA | Measurement of Position and Size of Neighboring Flaws by TOFD Method Using Multiple Probes | |
| Taro YOKOGUTI | Finite Element Analysis for Stage I Fatigue Crack Growth | |
| 2012 | Naoki OSADA | A Study for Ultrasonic Measurement of Friction Material Elastic Constants |
| Ryota KATO | Phase Velcity Determination of Lamb Wave Using Wavelet Analysis | |
| Daiti KOUYAMA | Experimental Investigation on Fatigue Crack Propagation in Thin-Walled CT Specimens of Ni-based Superallys | |
| Masaki SUGINO | A Study on Frequency Dependence of Ultrasonic Scattering at Rough Surfaces | |
| 2011 | Kazuki KAWASHIMA | Study of Microscopic Infrared Observation of Energy Dissipation by Fatigue Damage |
| Takumi NAGASHIMA | Study of Thermoelastic Stress Measurement of High-Polymer Material | |
| Ryogo KAWAI | Study on Evaluation of Fatigue Limit Based on Measurement of Dissipation Energy | |
| Tatsuya TOKUNAGA | A Study on the Improvement of Measurement Accuracy of TOFD Method Using Multiple Probes | |
| Shin YANAGISAWA | Study on Effect of Coating for Thermoelastic Stress Measurement | |
| 2010 | Mayo KAWASAKI | A Study on Microscopic Infrared Observation of Fatigue Damage of Metal |
| Taira HORIGANE | A Study on Ultrasonic Scattering at Rough Surfaces | |
| 2009 | Ariff, Zaini | Study of Microscopic Thermography Observation under Fatigue |
| Kazumasa KATO | Evaluation of Contact-Type Line-Focus Ultrasonic Probe | |
| 2008 | Daisuke ISHIHARA | A Study on Microscopic Infrared Observaiton of Fatigue Damage |
| Masafumi ITO | A Study of the Elastic Wave Propagation at the Composition Surface of the Piping System | |
| Masayuki IMAIZUMI | Study of Improvement of Visualizing Image of Phased Array | |
| 2007 | Tetsushi SUENAGA | Study of Experimental Model Analysis Using Thermoelastic Stress Measurement |
| Yosuke TORII | Study about Effect of Heat Conduction of Bending Stress Measurement Utilizing Thermoelastic Effect | |
| 2006 | Daisuke KANEKO | Study on Fatigue Strength Characteristics for Solder Joints |
| Kiyoshi NAKAYAMA | Inverse Analysis for Measurement of Passing Force in Automobile Member of Framework | |
| Yuuki MATSUOKA | Study of Thermoelastic Stress Measurement under Random Loading | |
| Yuta MORIYA | A Study on Development of Line-Focused SH Wave Ultrasonic Probe | |
| 2005 | Toru ISHIGURO | A Study on Evaluation of Falling Impact Force of Portable Electronics Device |
| Atsuo KIKUTI | A Study on Identification of Residual Stress Using Infrared Thermography | |
| Kentaro KAMIDUKI | A Study on Separation of Thin-Film by Repetitive Nanoindentation | |
| Daigo KOBAYASHI | An Inverse Problem Analysis of passing power of the Car Frame | |
| 2004 | Hidenori KIBA | A Study on Pariticle Method for Impact Analysis of an Object |
| Ryota MASUDA | A Study on Peeling Speed Dependency of Interface Strength | |
| Shigeru MORINAGA | A Study on Impact Tension Test of Polymer Alloy | |
| Hideshi WADA | An Evaluation of Residual Stress of Thermal Barrier Coating by Plasma Spraying | |
| 2003 | Daisuke ITO | A Study on Effect of Heat Transfer for Thermoelastic Stress Analysis |
| Toshimasa SAITO | A Study on Application of Line-Focused Ultrasonic Probe to TOFD Technique | |
| Osamu SHIMIZU | A Study on Evaluation of Mechanical Property Using Nanoindentation Techinique | |
| Hiroshi HOSHIKO | A Study on Evaluation of Bond Strength of Thin-Film on Polymeric Material | |
| Takeshi MIYAZAKI | A Study on Fatigue Damage at Solder Bonding Part | |
| Taishi MOTIDUKI | A Study on Impact Tension Test of Polymeric Material | |
| 2002 | Tomohiko KURA | A Study on Accuracy Improvement of Stress Analysis Using Raman Spectroscopy |
| Kotaro KUREBAYASHI | A Study on Analysis of Residual Stress Using Thermal Elastic Techinique | |
| Satoshi TUTIYA | A Durability Evaluation of Pressure Sensor for Automobile Tire | |
| Yuki NAKAMURA | A Study on Falling Impact Behavior of Mobile Device | |
| Makoto HAYASAKI | A Study on Fatigue Testing at Solder Bonding Part | |
| 2001 | Yohei OKUBO | A Study on Transmission Efficiency of Fiber-Optic Cable from the Point of View of Mechanics of Materials |
| Akira SHINOZAKI | A Study on Stress Analysis for Polymetric Material Using Raman Spectroscopy | |
| Takashi Tateno | A Study on Application of Invese Problem Analysis System of Impact Force | |
| Etsushi HUKUNAGA | A Study on Peel Strength Evaluation Using Multi-Stage Peel Testing | |
| Takemasa YOSHINAGA | A Study on Falling Impact of Portable Electronics Device |